:,Domestic high-quality alloy steel Q345 is selected
It is applicable to the excavation of general clay and loose soil, and the loading of sand, soil, gravel and other light working environments
Standard plate thickness
Domestic high-quality bucket tooth seat
Strengthening bucket
The tooth base plate and side blade plate of vulnerable parts are made of domestic high-quality high-strength wear-resistant steel NM360
It is applicable to the excavation of hard soil mixed with soft gravel or the loading of gravel and gravel and other heavy-duty operations
Thick plate
Domestic high-quality bucket tooth seat
Extend service life
Rock bucket
The tooth base plate and side blade plate are made of ultra-high strength wear-resistant steel imported from Sweden
Features of our Standard Buckets
| 1. |
The prefect design of the standard bucket is helpful efficient digging, filling and bucket breakout force,making our standard buckets are widely welcomed by contractors while guaranteeing quality and longevity. |
| 2. |
Manufactured to any width and bucket capacity as required by customer. |
| 3. |
High quality materials, ex Q345B, NM360/400, 450/500 |
| 4. |
OEM Standard Buckets. |
| 5 |
Strong and durable construction to withstand robust working conditions. |
Excavator Quick Connector Usage Table
Usage Stage
Operation Steps
Precautions
Maintenance Essentials
Before Installation
Check the compatibility of the quick connector with the excavator, ensuring the models match. 2. Clean the connection parts of the excavator and the connection surface of the quick connector, removing oil, dust, and debris.
Ensure model matching, otherwise, installation difficulties or inability to use normally may occur. 2. Incomplete cleaning may affect the stability of the connection.
Regularly check the connection parts for wear or damage, replace if necessary. 2. Store the connector to avoid collision and compression.
During Installation
Lift the quick connector to the excavator connection part, aligning the installation hole. 2. Use special tools, such as bolts, nuts, etc., to firmly secure the quick connector to the excavator. 3. Connect the hydraulic lines, ensuring a good seal with no leaks.
Pay attention to safety during lifting to avoid collision accidents. 2. Tighten the fixing bolts to the specified torque value to prevent loosening. 3. The hydraulic line connection must be correct, otherwise, it may lead to functional failure.
In Use
Before operating the excavator, perform a no-load test of the quick connector's functions, such as clamping, releasing, etc., to ensure normal operation. 2. Depending on the work needs, use the quick connector to quickly change different work devices, such as buckets, breakers, etc. 3. During work, closely monitor the quick connector's operating status, and if there are abnormal sounds, vibrations, or leaks, stop work immediately for inspection.
The no-load test time should not be less than 5 minutes, ensuring smooth operation of all components. 2. When changing work devices, do so in a safe area, avoiding the approach of unrelated personnel. 3. Do not continue work until the abnormal situation is resolved, to avoid further damage.
After Use
After work is completed, remove the work device from the quick connector and store it properly. 2. Clean the quick connector, removing dirt and impurities from the surface. 3. Store the quick connector in a dry, well-ventilated place.
Store the work device reasonably to avoid damage. 2. The storage environment should be dry to prevent rusting.
Packing & Delivery
Packaging Details: International standard pallet or wood case.
1. one 20GP can load about 12-14 pieces 1.0m3 or 1.2m3 buckets for 20ton excavator(Width less than 42
inches )
2. one 40HC can load about 26-28 pieces 1.0m3 or 1.2m3 buckets for 20ton excavator;
3. one 20GP can load about 8 pieces 1.6m3 buckets for 30ton excavator;
4. one 40HC can load about 16 pieces 1.6m3 buckets for 30ton excavator.
Delivery Time: Shipped in 20 days after payment
Audited Supplier 
){kind=link}